INVESTIGATION OF THE EFFECTS OF THE MAGNETIC CIRCUIT DESIGN PARAMETERS ON THE ELECTROMECHANICAL VALVE ACTUATORS

Bu çalışmada elektromekanik supap mekanizmalarında kullanılabilecek uygun manyetik devre tipleri incelenmiştir. Disk tipi manyetik devreye elektromekanik supap mekanizması iki farklı tipte tasarlanmış ve yay sabiti, kütle, besleme gerilimi ve tutma akımı gibi çeşitli tasarım parametrelerinin sistem üzerindeki etkileri incelenmiştir. Sistemin statik ve dinamik denklemleri çıkarılarak MATLAB/Simulink programı ile sayısal çözümleri elde edilmiştir. Prototip iki sistem üzerinde deneysel çalışmalar yürütülmüş ve teorik sonuçlarla karşılaştırılmıştır. Elde edilen sonuçlardan benzetim ve deneysel çalışmaların birbiriyle uyumlu olduğu görülmüştür

Manyetik Devre Tasarım Parametrelerinin Elektromekanik Supap Mekanizması Üzerindeki Etkilerinin İncelenmesi

The paper describes the suitable type of magnetic circuits used in the electromechanical valve actuators (EVAs). Two different types of EVA models with the disc type of magnetic circuits were designed and the effects of various design parameters such as spring constant, moving mass, supply voltage, holding force on the system were investigated. The static and dynamic equations of the system were derived and their numerical solutions were obtained with MATLAB/Simulink program. The detailed theoretical analysis and experimental tests were carried out on the manufactured different prototypes of the EVAs. Simulation and experimental results showed a good agreement with each other

___

  • Park, SH., Lee, J., Yoo, J., Kim, D., Park, K. (2003) Effects of design and operating parameters on the static and dynamic performance of an electromagnetic valve actuator. Journal of Automobile Engineering, 217: 193-201. doi: 10.1243/09544070360550480
  • Nitu, C., Gramescu, B., Nitu, S. (2005) Application of electromagnetic actuators to a variable distribution system for automobile engines. Journal of Materials Processing Technology, 161: 253-257. doi:10.1016/j.jmatprotec.2004.07.032
  • Clark, RE., Jewell, GW., Forrest, SJ., Rens, J., Maerky, C. (2005) Design features for enhancing the performance of electromagnetic valve actuation systems. IEEE Transactions on Magnetics. 41-3: 1163-1168. doi:10.1109/TMAG.2004.843342.
  • Cope, D., Wright, A. (2006) Electromagnetic Fully Flexible Valve Actuator, SAE Technical Paper 2006-01-0044, doi:10.4271/2006-01-0044.
  • Chladny, RR., Koch, CR., Lynch, AF. (2005) Modeling automotive gas-exchange solenoid valve doi:10.1109/TMAG.2004.841701 IEEE Transactions on Magnetics 41-3: 1155-1162.
  • Kamis, Z. (2005) The investigation of design and control of electromechanical actuator for engine valves (in Turkish). PhD Dissertation. University of Uludağ.
  • Xiang, JY. (2002) Modeling and control of a linear electro-mechanical actuator (LEMA) for operating engine valves. Industry Applications Conference, 37th IAS Annual Meeting. Conference Record of the (Volume:3). doi: 10.1109/IAS.2002.1043799
  • Eyabi, P., Washington, G. (2006) Modeling and sensorless control of and electromagnetic valve actuator. Mechatronics. 16:159-175. doi:10.1016/j.mechatronics.2005.11.008.
  • Peterson, KS. (2005) Control methodologies for fast & low impact electromagnetic actuators for engine valves. Dissertation. The University of Michigan.
  • Mohamed, E. (2012) Modeling and performance evaluation of an electromechanical valve actuator for a camless IC engine. International Journal of Energy and Environment. 3-2: 275-294. ISSN: 2076-2895
  • Velasco, CIH. (2011) Modelling, analysis, control and experimental validation of electromechanical valve actuators in automotive systems. Dissertation. University of Naples Federico II.
  • Chukwuneke, JL., Achebe CH, Okolie PC, Anisiji OE (2013) Modelling of electromechanical control of camless internal combustion engine valve actuator. International Journal of Science and Engineering Investigations. 2-15: 123-136. ISSN: 2251-8843
  • Topcu, EE., Kamis, Z., Yüksel, I. (2008) Simplified numerical solution of electromechanical doi:10.1016/j.mechatronics. 2008.05.006 by look-up tables. Mechatronics. 18:559-565.
  • Roters, HC. (1941) Electromagnetic devices. John Wiley, USA.
  • Sefkat, G. (2010) Investigating static and dynamic characteristics of electromechanical actuators (EMA) with MATLAB GUIs. Computer Applications in Engineering Education. 18-2:383-396 (2010) doi: 10.1002/cae.20279
Uludağ Üniversitesi Mühendislik Fakültesi Dergisi-Cover
  • ISSN: 2148-4147
  • Yayın Aralığı: 3
  • Başlangıç: 2002
  • Yayıncı: BURSA ULUDAĞ ÜNİVERSİTESİ > MÜHENDİSLİK FAKÜLTESİ
Sayıdaki Diğer Makaleler

PLAKA, GÖVDE-BORU VE MİNYATÜR BORU TİP ISI EŞANJÖRLERİNİN TEKNİK VE EKONOMİK AÇIDAN KARŞILAŞTIRILMASI

AHMET SERHAN CANBOLAT, BURAK TÜRKAN, AKIN BURAK ETEMOĞLU, Muhiddin CAN, ATAKAN AVCI

COMPUTER-AIDED DETECTION OF BRAIN TUMORS USING MORPHOLOGICAL RECONSTRUCTION

Buket DOĞAN, ÖNDER DEMİR, Seda ÇALIK KAZDAL

NEHİRLERDE SEDİMENT MİKTARININ BELİRLENMESİNDE AMPİRİK MODELLEME TEKNİKLERİNİN DEĞERLENDİRİLMESİ

Başak GÜVEN, Zeynep AKDOĞAN

DC~1.6 GHZ GaAS MESFET’LERE SAHİP DAĞILMIŞ PARAMETRELİ KUVVETLENDİRİCİ

Bahadır HİÇDURMAZ, Cengiz ÖZZAİM

OPTİMUM HAVA TABAKASINA SAHİP ÇİFT CAMLI PENCERELERİN YAKIT TÜKETİMİ VE EMİSYON AÇISINDAN DEĞERLENDİRİLMESİ

OKAN KON

DBYBHY-2007'DE TANIMLANAN HASAR KRİTERLERİNİN BETONARME KOLON ELEMANLAR İÇİN İNCELENMESİ

Umut Hasgul, ALTUĞ YAVAŞ, KAAN TÜRKER, Mehmet TERZİ, TAMER BİROL

INVESTIGATION OF THE EFFECTS OF THE MAGNETIC CIRCUIT DESIGN PARAMETERS ON THE ELECTROMECHANICAL VALVE ACTUATORS

ZELİHA KAMIŞ KOCABIÇAK, ELİF ERZAN TOPÇU

MİKRODALGA ENERJİSİ YARDIMIYLA HİYERARŞİK YAPILI KARBON NANOTÜP/KARBON LİFİ KOMPOZİTLERİNİN ÜRETİLMESİ

Selçuk POYRAZ

MOSELLE NEHRİ’NDEKİ DÜŞÜK DEBİLERİN BENZETİMİ İÇİN ÇOKLU GENETİK PROGRAMLAMA MODELİNİN KALİBRE EDİLMESİ

Ali DANANDEH MEHR, Mehmet Cüneyd DEMİREL

GÜNEŞ PİLİ UYGULAMALARI İÇİN CdTe YARIİLETKEN İNCE FİLMLERİN ELEKTRODEPOZİSYON YÖNTEMİYLE ÜRETİLMESİ

AHMET PEKSÖZ