Fe-TABANLI FeCoNiBSiNb İLE Co-TABANLI CoFeNiBSiNb CAMSI ŞERİTLERDE Cu İLAVESİNİN MANYETOKALORİK ÖLÇÜMLERE VE MANYETİK DİRENCE ETKİLERİ

Bu çalışmada eriyik eğirme yöntemiyle üretilmiş Fe-tabanlı Fe0,402Co0,201Ni0,067B0,227Si0,053Nb0,05 ve Co-tabanlı Co0,402Fe0,201Ni0,067B0,227Si0,053Nb0,05 amorf şeritlere % 0 ile % 1 arasında değişen oranlarda ilave edilen Cu elementinin manyetokalorik özellikler ile manyetik direnç üzerine etkisi araştırılmıştır. Bu çerçevede numunelerin yapısal analizleri XRD, ısıl analizleri DSC ölçümleriyle, Curie sıcaklıkları dM/dT - sıcaklık eğrileriyle, manyetik özellikler M-H ve M-T ölçümleriyle belirlenmiş, manyetik entropi değişimi ile sıcaklık arasındaki ilişki yardımıyla örneklerin sahip oldukları manyetokalorik özellikler belirlenmiştir. Bunlara ilave olarak, sıcaklığa bağlı manyetik direnç ölçümleri gerçekleştirilerek kompozisyona Cu elementi eklenmesinin manyetik dirence olan etkileri araştırılmıştır. Bu çalışmanın sonucunda, Fe- ve Co-tabanlı metalik cam şeritlerde tüm kompozisyona uygun miktarda (yaklaşık % 0,75) Cu ilavesinin manyetokalorik özellikleri önemli ölçüde geliştirdiği görülmüş ve teklif edilen kompozisyonun yüksek sıcaklıklarda manyetik soğutma amacıyla kullanılabileceği değerlendirilmiştir.

The Effects of Cu Addition in Fe-Based FeCoNiBSiNb and Co- Based CoFeNiBSiNb Glassy Ribbons on Magnetocaloric Measurements and Magnetoresistance

In this research, the effects of Cu addition which ranges from 0 % to 1 % to Fe-based Fe0.402Co0.201Ni0.067B0.227Si0.053Nb0.05 and Co-based Co0.402Fe0.201Ni0.067B0.227Si0.053Nb0.05 glassy ribbons obtained by melt spinning method on magnetocaloric and magnetoresistance properties were investigated.  In this regard, structural analyzes of the samples were evaluated by XRD, thermal properties were analyzed by DSC measurements, Curie temperatures were obtained from dM/dT vs temperature curves, magnetic properties were determined by using M-H and M-T measurements, magnetic entropy changes depending on temperature were used to determine magnetocaloric properties of the samples. In addition to these, the temperature dependent magnetoresistances were measured and the effects of adding Cu element to the composition on magnetoresistance properties were investigated. As a result, it has been concluded that the appropriate addition of Cu (about 0.75 %) on Fe- or Co-based metallic glasses enhances magnetocaloric properties and the proposed composition can probably be used for magnetic refrigeration at high temperatures.

___

  • 1. Annouar, F., Lassri, H., Ayadi, M., Omri, M., Lassri, M. ve Krishnan, R. (2005), Magnetic exchange coupling in amorphous Fe80-xDyxB20 alloys, Journal of Alloys Compounds, 397 (1-2), 42-46. doi: 10.1016/j.jallcom.2005.01.034
  • 2. Caballero-Flores, R., Victorino, F., Conde, A., Knipling, K.E. ve Willard, M.A. (2010a), Influence of Co and Ni addition on the magnetocaloric effect in Fe88-2xCoxNixZr7B4Cu1 soft magnetic amorphous alloys, Applied Physics Letters, 96 (18), 182506. doi: 10.1063/1.3427439
  • 3. Caballero-Flores, R., Victorino, F., Conde, A. ve Kiss, L.F. (2010b), Influence of Mn on the magnetocaloric effect of nanoperm-type alloys, Journal of Applied Physics, 108 (7), 073921. doi:10.1063/1.3489990
  • 4. Civan, E., Şarlar, K. ve Küçük, İ. (2017a), Improving magnetocaloric properties of Fe68-xCrxTb5B23Nb4 (x = 0, 2, 4, 6 and 8) metallic glasses having high glass-forming ability with tunable Curie temperature, Philosophical. Magazine Part A: Materials Science, 97 (18), 1464-1478. doi: 10.1080/14786435.2017.1303578
  • 5. Civan, E., Şarlar, K. ve Küçük, İ (2017b), Comparison of Fe68-xCrxTb5B23Nb4 (x = 0, 2, 4 and 6) and Fe68-xGdxTb5B23Nb4 (x = 0, 2 and 6) metallic glasses having high glass forming ability with tunable Curie temperature regarding their magnetocaloric properties, 24th International Symposium On Metastable, Amorphous and Nanostructured Materials (ISMANAM 2017), Palacio Miramar, San Sebastián – Donostia (Guipúzcoa), Spain, 162, ISBN: 978-84-697-3162-8.
  • 6. Dong, Y., Man, Q., Sun, H., Shen, B., Pang, S., Zhang, T., Makino, A. ve Inoue A. (2011), Glass-forming ability and soft magnetic properties of (Co0.6Fe0.3Ni0.1)67B22+xSi6−xNb5 bulk glassy alloys, Journal of Alloys and Compounds, 509, 206-209. doi: 10.1016/j.jallcom.2011.01.045
  • 7. Dou, L., Liu, H., Hou, L., Xue, L., Yang, W., Zhao, Y., Chang, C. ve, Shen, B. (2014), Effects of Cu substitution for Fe on the glass-forming ability and soft magnetic properties for Fe-based bulk metallic glasses, Journal of Magnetism and Magnetic Materials, 358-359, 23-26. doi: 10.1016/j.jmmm.2014.01.014
  • 8. Franco, V., Borrego, J.M., Conde, C.F. ve Conde, A. (2006), Refrigerant capacity of FeCrMoCuGaPCB amorphous alloys, Journal of Applied Physics Letters, 100, 083903. doi: 10.1063/1.2358311
  • 9. Franco, V., Conde, A. ve Kiss, L.F. (2008), Magnetocaloric response of FeCrB amorphous alloys: Predicting the magnetic entropy change from the Arrott–Noakes equation of state, Journal of Applied Physics, 104 (3), 033903. doi: 10.1063/1.2961310
  • 10. Heisenberg, W. (1928), Zur Theorie des Ferromagnetismus [On the theory of ferromagnetism], Z. Phys., 49 (9-10), 619–636. doi: 10.1007/BF01328601
  • 11. Hirata, A., Hirotsu, Y., Amiya, K., Nishiyama, N. ve Inoue A. (2008), Nanocrystallization of complex Fe23B6-type structure in glassy Fe-Co-B-Si-Nb alloy, Intermetallics, 16 (4), 491-497. doi: 10.1016/j.intermet.2007.11.006
  • 12. Kitanovski, A., Tusek, J., Tomc, U., Plaznik, U., Ozbolt, M. ve Poredos, A. (2015), Magnetocaloric Energy Conversion, Springer International Publishing, Switzerland. doi:10.1007/978-3-319-08741-2
  • 13. Küçük, İ., Şarlar, K., Adam, A. ve Civan, E. (2016), Magnetocaloric and magnetoresistance properties in Co-based (Co0.402Fe0.201Ni0.067B0.227Si0.053Nb0.05)100-xCux (x=0-1) glassy ribbons, Philosophical Magazine Part A: Materials Science, 96 (30), 3120-3130. doi: 10.1080/14786435.2016.1227485
  • 14. Lai, J., Zheng, Z.G., Zhong, X.C., Franco, V., Montemayor, R., Liu, Z.W. ve Zeng, D.C. (2015), Table-like magnetocaloric effect of Fe88-xNdxCr8B4 composite materials, Journal of Magnetism and Magnetic Materials, 390, 87-90. doi: 10.1016/j.jmmm.2015.04.046
  • 15. Law, J.Y., Ramanujan, R.V. ve Franco, V. (2010), Tunable Curie temperatures in Gd alloyed Fe-B-Cr magnetocaloric materials, Journal of Alloys and Compounds, 508 (1), 14-19. doi: 10.1016/j.jallcom.2010.08.049
  • 16. Law, J.Y., Franco, V. ve Ramanujan, R.V. (2011), Influence of La and Ce additions on the magnetocaloric effect of Fe-B-Cr based amorphous alloys, Applied Physics Letters, 98 (19), 192503. doi: 10.1063/1.3589353
  • 17. Li, J., Huo, J., Law, J., Chang, C., Du, J., Man, Q., Wang, X. ve Li, R.W. (2014), Magnetocaloric effect in heavy rare-earth elements doped Fe-based bulk metallic glasses with tunable Curie temperature, Journal of Applied Physics, 116 (6), 063902. doi: 10.1063/1.4892431
  • 18. Li, J., Law, J.Y., Huo, J., He, A., Man, Q., Chang, C., Men, H., Wang, J., Wang, X. ve Li, R.W. (2015a), Magnetocaloric effect of Fe–RE–B–Nb (RE = Tb, Ho or Tm) bulk metallic glasses with high glass-forming ability, Journal of Alloys and Compounds, 644, 346-349. doi: 10.1016/j.jallcom.2015.04.170
  • 19. Li, J., Law, J.Y., Ma, H., He, A., Man, Q., Men, H., Huo, J., Chang, C., Wang, X. ve Li, R.W. (2015b), Magnetocaloric effect in Fe–Tm–B–Nb metallic glasses near room temperature, Journal of Non-Crystalline Solids, 425, 114-117. doi: 10.1016/j.jnoncrysol.2015.06.002
  • 20. Love, L.J., Jansen, J.F., McKnight, T.E., Roh, Y. ve Phelps, T.J. (2004), A magnetocaloric pump for microfluidic applications, IEEE Transactions Nanobioscience, 3 (2), 101-110. doi: 10.1109/TNB.2004.828265
  • 21. Min, S.G., Kim, K.S., Yu, S.C. ve Lee, K.W. (2007), The magnetization behavior and magnetocaloric effect in amorphous Fe–Nb–B ribbons, Materials Science and Engineering A, 448–451, 423–425. doi: 10.1016/j.msea.2006.02.357
  • 22. Palmy, C. (2006), A new thermo-magnetic wheel, European Journal of Physics, 27 (6), 1289–1297. doi: 10.1088/0143-0807/27/6/003
  • 23. Rahman, A., Luo, Q., Lu, Y. ve Shen, J. (2015), Recuring effects of Cu addition on magnetic properties in Fe-based bulk metallic glasses, Journal of Non-Crystalline Solids, 422, 1-5. doi: 10.1016/j.jnoncrysol.2015.04.041
  • 24. Reis, M.S. (2011), Oscillating magnetocaloric effect, Applied Physics Letters, 99 (5), 052511. doi: 10.1063/1.3615296
  • 25. Şarlar, K., Civan, E. ve Küçük, İ., (2017), Magnetocaloric effect and temperature-dependent magnetoresistance in Cu-doped FeCoNiBSiNb amorphous alloys, Journal of Non-Crystalline Solids, 471, 169-174. doi: 10.1016/j.jnoncrysol.2017.05.037
  • 26. Şarlar, K. ve Küçük, İ. (2015), Glass forming ability and magnetic properties of Co(40.2-x)Fe(20.1+x)Ni6.7B22.7Si5.3Nb5 (x=0-10), Journal of Magnetism and Magnetic Materials, 374, 607-610. doi: 10.1016/j.jmmm.2014.08.060
  • 27. Tian, H.C., Zhong, X.C., Liu, Z.W., Zheng, Z.G. ve Min, J.X. (2015), Achieving table-like magnetocaloric effect and large refrigerant capacity around room temperature in Fe78-xCexSi4Nb5B12Cu1 (x=0–10) composite materials, Materials Letters, 138, 64-66. doi: 10.1016/j.matlet.2014.09.127
  • 28. Tishin, A.M. (2006), Method for carrying out a magnetic therapy of malignant neoplasms, Patent No: WO 2006135270A1.
  • 29. Tishin, A.M., Zatsepina, E.V., Egolf, P.W. ve Vuarnoz, D. (2009), Magnetocaloric effect applied for a cancer tumour defeat: an improved hyperthermia method, Proceedings of third IIF-IIR international conference on magnetic refrigeration at room temperature, Des Moines, IA, USA, 11–15 May 2009.
  • 30. Ujihara, M., Carman, G.P. ve Lee, D.G. (2007), Thermal energy harvesting device using ferromagnetic materials, Applied Physics Letters, 91 (9), 093508. doi: 10.1063/1.2775096
  • 31. Wang, W.H., Pan, M.X., Zhao, D.Q., Hu, Y. ve Bai, H. (2004), Enhancement of the soft magnetic properties of FeCoZrMoWB bulk metallic glass by microalloying, Journal of Physics: Condensed Matter, 16 (21), 3719-3723. doi:10.1088/0953-8984/16/21/020
  • 32. Zhang, H., Li, R., Xu, T., Liu, F. ve Zhang, T. (2013), Near room-temperature magnetocaloric effect in FeMnPBC metallic glasses with tunable Curie temperature, Journal of Magnetism and Magnetic Materials, 347, 131–135. doi: 10.1016/j.jmmm.2013.07.020
  • 33. Zhang, M., Li, J., Kong, F. ve Liu, J. (2015), Magnetic properties and magnetocaloric effect of FeCrNbYB metallic glasses with high glass-forming ability, Intermetallics, 59, 18-22. doi: 10.1016/j.intermet.2014.12.005
Uludağ Üniversitesi Mühendislik Fakültesi Dergisi-Cover
  • ISSN: 2148-4147
  • Yayın Aralığı: 3
  • Başlangıç: 2002
  • Yayıncı: BURSA ULUDAĞ ÜNİVERSİTESİ > MÜHENDİSLİK FAKÜLTESİ
Sayıdaki Diğer Makaleler

%100 AKRİLİK, PES/AKRİLİK VE PAMUK/AKRİLİK KARIŞIMLI DOKUMA KUMAŞLARIN BONCUKLANMA ÖZELLİKLERİNİN İNCELENMESİ

Arzu YAVAŞCAOĞLU, Recep EREN, Gülcan SÜLE

OTOMOBİL SÜRÜCÜ KOLTUĞU KIZAK TASARIMI VE GELİŞTİRİLMESİ

Ömer Osman DEVECİ, Durmuş Ali ATALAY

FFR TEKNİĞİ KULLANILAN ÇOK HÜCRELİ LTE-A SİSTEMLERİNDE KAYNAK ATAMA ALGORİTMALARININ KARŞILAŞTIRILMASI

Ahmet Emir YAKUP, Kamil Hakan KAYA

METAL KOMPOZİT ŞÖNİL İPLİKLERDEN ÜRETİLMİŞ ÖRME KUMAŞLARIN ELEKTRİKSEL, ANTİBAKTERİYEL VE PERFORMANS ÖZELLİKLERİNİN ARAŞTIRILMASI

İlkan ÖZKAN, İlhami İLHAN

Ti6Al4V MALZEMESİNİN TORNALAMA İŞLEMİNDE ÖZGÜL KESME ENERJİSİ VE YÜZEY PÜRÜZLÜĞÜNÜN İNCELENMESİVE YAPAY SİNİR AĞLARI TEMELLİ TAHMİN MODELİ GELİŞTİRİLMESİ

Gökberk SERİN, Müge KAHYA, Murat Ahmet ÖZBAYOĞLU, Hakkı Özgür ÜNVER

INVESTIGATION OF SOME MECHANICAL AND AIR PERMEABILITY PROPERTIES OF SHIRTING FABRICS PRODUCED FROM COMPACT YARNS MADE OF NATURAL AND SYNTHETIC FIBRES

Erhan Kenan ÇEVEN, Gizem KARAKAN GÜNAYDIN

ARITMA ÇAMURLARININ TARIMSAL AMAÇLI KULLANIMI: TOPRAKTAKİ AZOT PROSESLERİNDE MEYDANA GELEN DEĞİŞİMLER

Esra DEMİR YANCAR, Fatma Olcay ŞAĞBAN TOPAÇ

51CrV4 Yay Çeliğinde Isıl İşlemve Kesit Geometrisinin Çarpışma Dayanıklılığı Üzerine Etkisi

Çiğdem DİNDAR, Hüseyin BEYTÜT, Selçuk KARAGÖZ

Numerical Investigation of the Spray Characteristics in an Outwardly-Opening Piezoelectric Gasoline Injector for Different Ambient Conditions

Halil İbrahim TAŞ, Mehmet İhsan KARAMANGİL

DOĞAL VE SENTETİK LİF ESASLI KOMPAKT İPLİKLERDEN ÜRETİLEN GÖMLEKLİK KUMAŞLARIN BAZI MEKANİK VE HAVA GEÇİRGENLİĞİ ÖZELLİKLERİNİN İNCELENMESİ

Erhan Kenan ÇEVEN, Gizem KARAKAN GÜNAYDIN