A new method for accurate estimation of PV module parameters and extraction of maximum power point under varying environmental conditions
A new method for accurate estimation of PV module parameters and extraction of maximum power point under varying environmental conditions
The objective of this paper is to estimate the values of five parameters (A, Rse , Rsh , ILG , and Isat) of a PV module more accurately and to extract the maximum power point (MPP) accurately under varying environmental conditions. Suitable new equations are proposed, by which the values of the series and shunt resistances are initialized in order to obtain good convergence speed in the Gauss Seidel method. In this work, two new equations are proposed to find the ideality factor and shunt resistance and to obtain accurate MPP of the PV model under varying environmental conditions. The proposed PV model is validated at standard test conditions and under varying environmental conditions. Current voltage and power voltage characteristics of different PV modules are simulated using MATLAB. Accuracy of the proposed model is validated by comparing with the results of an adaptive neuro-fuzzy inference system and experimental data taken under varying environmental conditions.
___
- [1] Rauschenbach HS. Solar Cell Array Design Handbook. Vol. 1, JPL, Pasadena, CA, USA: Van Nostrand Reinhold, 1976.
- [2] Fraunhofer Institute for Solar Energy Systems. Available at: _____www.sciencedaily.com/releases/2013/09/130923204214.htm >, access date: 07.03.2014.
- [3] Celik AN, Acikgoz N. Modelling and experimental verification of the operating current of mono-crystalline photovoltaic modules using four and five parameter models. Appl Energ 2007; 84: 1-15.
- [4] Alonso-Garcia MC, Ruiz JM. Analysis and modelling the reverse characteristic of photovoltaic cells. Sol Energ Mat Sol C 2006; 90: 1105-1120.
- [5] Carrero C, Ramirez D, Rodr´ıguez A, Platero CA. Accurate and fast convergence method for parameter estimation of PV generators based on three main points of the I-V curve. Renew Energ 2011; 36: 2972-2977.
- [6] Zhu XG, Fu ZH, Long XM, Li X. Sensitivity analysis and more accurate solution of photovoltaic solar cell parameters. Sol Energy 2011; 85: 393-403.
- [7] Saloux E, Teyssedou A, Sorin M. Explicit model of photovoltaic panels to determine voltages and currents at the maximum power point. Sol Energy 2011; 85: 713-722.
- [8] Cotfas D, Cotfas P, Kaplanis S, Ursutiu D. Results on series and shunt resistances in a c-Si PV cell. Comparison using existing methods and a new one. J Optoelectron Adv M 2008; 10: 3124-3130.
- [9] Ly Diallo H, Dieng B, Ly I, Dione MM, Ndiaye M, Lemrabott OH, Bako ZN, Wereme A, Sissoko G. Determination of the recombination and electrical parameters of a vertical multijunction silicon solar cell. Res J Appl Sci Eng Technol 2012; 4: 2626-2631.
- [10] Chatterjee A, Keyhani A, Kapoor D. Identification of photovoltaic source models. IEEE T Energy Conver 2011; 26: 883-889.
- [11] Kulaksiz AA. ANFIS-based estimation of PV module equivalent parameters: application to a stand-alone PV system with MPPT controller. Turk J Elec Eng & Comp Sci 2013; 21: 2127-2140.
- [12] De Soto W, Klein SA, Beckman WA. Improvement and validation of a model for photovoltaic array performance. Sol Energy 2006; 80: 78-88.
- [13] Ghani F, Duke M. Numerical determination of parasitic resistances of a solar cell using the Lambert W-function. Sol Energy 2011; 85: 2386-2394.
- [14] Badescu V. Simple optimization procedure for silicon-based solar cell interconnection in a seriesparallel PV module. Energ Convers Manage 2006; 47: 1146-1158.
- [15] Soon JJ, KS Low. Photovoltaic model identification using particle swarm optimization with inverse barrier constraint. IEEE T Power Electr 2012; 27: 3975-3983.
- [16] Lun SX, Du CJ, Guo TT, Wang S, Sang JS, Li JP. A new explicit IV model of a solar cell based on Taylors series expansion. Sol Energy 2013; 94: 221-232.
- [17] Liu G, Nguang SK, Partridge A. A general modeling method for IV conversion characteristics of geometrically and electrically configured photovoltaic arrays. Energ Convers Manage 2011; 52: 3439-3445.
- [18] Lo Brano V, Ciulla G. An efficient analytical approach for obtaining a five parameters model of photovoltaic modules using only reference data. Appl Energ 2013; 111: 894-903.
- [19] Jung JH, Ahmed S. Real-time simulation model development of single crystalline photovoltaic panels using fast computation methods. Sol Energy 2012; 86: 1826 - 1837.
- [20] Sera D, Teodorescu R, Rodriguez P. PV panel model based on datasheet values. In: IEEE 2007 International Symposium on Industrial Electronics; 47 June 2007; Vigo, Spain: IEEE. pp. 2392 - 2396.
- [21] Freeman D. Introduction to Photovoltaic Systems Maximum Power Point Tracking. Texas Instruments, Application report, Nov. 2010; SLVA446: 1-7.
- [22] Esram T, Chapman PL. Comparison of photovoltaic array maximum power point tracking techniques. IEEE T Energy Conver 2007; 22: 439-449.
- [23] Kashif I, Zainal S. An improved modeling method to determine the model parameters of photovoltaic (PV) modules using differential evolution (DE). Sol Energy 2011; 85: 2349-2359.
- [24] Salih SM, Salih FF, Hasan ML, Edaiawi MY. Performance evaluation of photovoltaic models based on a solar model tester. IJITCS 2012; 7: 1-10.