Computer Assisted Preliminary Design of R Plants

Computer Assisted Preliminary Design of R Plants

Run-of-river type hydroelectric power plants generate electrical energy by using aportion of the available flow in the river. A computer program called MINI- developed to perform the hydraulic design of run-of-river plants. This program, whi under the Windows operating system, is developed in C# programming language. HPD is capable of performing hydraulic design of structural components of diversi with lateral intake and overflow spillway, canal, forebay, and penstock. In addition determine the optimum design discharge, optimum installed capacity, and o penstock diameter for this type of plants. It is desired to have quick successive run various scenarios and combinations of relevant parameters. An application is prese illustrate the use of the program.

___

  • 1 Official web page of State Hydraulic Works, www.dsi.gov.tr.
  • 2 Mays, L.W. (2001). Water Resources Engineering, John Wiley and Sons, New
  • 3 Yıldız, K., (1992). Hydropower Plants: Calculation Guidelines and Design, Publications of Turkish State Hydraulic Works (in Turkish).
  • 4 Wylie, E.B., Streeter, V.L., and Suo L., (1993). Fluid Transients in Systems, Hall, NJ 07458.
  • 5 ESHA, (2004). Guide on How to Develop a Small Hydropower Plant, Publica the European Small Hydropower Association.
  • 6 Knauss, J., (1987). Swirling Flow Problems at Intakes, AIHR Hydraulic St Design Manual, Rotterdam, Netherlands.
  • 7 USBR (1977). Engineering Monograph No 3: Welded Steel Penstocks, R Edition, Washington: Water Resources Technical Publication.
  • 8 USBR (1987). Design of Small Dams, Third Edition, Washington: Water Res Technical Publication.
  • 9 Yanmaz, A.M., (2013). Applied Water Resources Engineering, Fourth edition, Press, Ankara.
  • 10 Camp, T.R., (1946). “Sedimentation and the Design of Settling Tanks”, Trans ASCE, Vol. 3, No. 2285, pp. 895-936.
  • 11 Sungur, T., (1988). Hydraulic sytuctures, Vol.2:Diversion Weirs, DSİ Public Ankara (in Turkish).