The Abrasive Wear Behaviour Of Boron Steels
In this study, the abrasive wear behaviour of untreated and heat treated AISI (SAE) 15B35H and 15B41H boron steel specimens are experimentally investigated in the laboratory conditions and the wear results are compared with respect to their hardnesses. At the end of the study, it is observed that the abrasive wear resistance of boron steel specimens increased with increasing hardness values of the test material.
The Abrasive Wear Behaviour Of Boron Steels
In this study, the abrasive wear behaviour of untreated and heat treated AISI (SAE) 15B35H and 15B41H boron steel specimens are experimentally investigated in the laboratory conditions and the wear results are compared with respect to their hardnesses. At the end of the study, it is observed that the abrasive wear resistance of boron steel specimens increased with increasing hardness values of the test material.
___
- [1] A. Misra and I. Finnie, “A Review of the Abrasive Wear of Metals”, Journal of
Engineering Materials and Technology, Vol.104, pp. 94-101, 1982.
- [2] N.Y. Sarı, Ş.Y. Şirin, E. Kaluç ve K. Tülbentçi, “Makine Parçalarının Aşınmasına
Karşı Modern Yüzey İşlemleri (1)”, Makine Magazin, Vol.14, 48-51, 1997.
- [3] N.Y. Sarı ve E. Kaluç, “Endüstride Aşınma Problemleri”, Makine ve Metal
Teknolojisi, Vol.50, 64-68, 1996.
- [4] N. Axén and K.-H. Zum Gahr, “Abrasive Wear of TiC-Steel Composite Clad Layers
on Tool Steel”, Wear, Vol.157, pp. 189-201, 1992.
- [5] M.A. Moore, “A Review of Two-Body Abrasive Wear”, Wear, Vol.27, 1-17, 1974.
- [6] P.L. Hurricks, “Some Metallurgical Factors Controlling the Adhesive and Abrasive
Wear Resistance of Steels. A Review”, Wear, Vol.26, pp. 285-304, 1973.
- [7] P.L. Hurricks, “Review Paper: Some Aspects of the Metallurgy and Wear
Resistance of Surface Coatings”, Wear, Vol.22, 291-320, 1972.
- [8] M.M. Khruschov, “Principles of Abrasive Wear”, Wear, Vol.28, pp. 69-88, 1974.
- [9] I.M. Hutchings, “Wear by hard particles, Chapter 6, In: Tribology: Friction and
Wear of Engineering Materials”, Edward Arnold Pub., London, 1992.
- [10] M. Ertürkmen, “Borlu Çelikler”, Yüksek Lisans Tezi, Marmara Üniversitesi Fen
Bilimleri Enstitüsü, İstanbul, 1987.
- [11] http://www.corusevents.com/ccilibrary/, “Boron Steels”, 2004.
- [12] http://www.rautaruukki.fi/, “RAEX B Boron Steels”, 2004.
- [13] Anonymous, “TE53 Multi-Purpose Friction and Wear Tester Operating
Instructions: Wear Testing”, TE53 Multi-Purpose Friction and Wear Tester
Operating Instructions Manual, pp. 8-10, 1994.