Poli (metilmetakrilat-ko-metakrilik asit) Sentezi, Karakterizasyonu ve Termal Bozunma Kinetiği
Bu çalışmada, poli (metil metakrilat-ko-metakrilik asit) (poli (MM-ko-MA))) 70 ° C'de benzoil peroksit , metakrilik asit ve metil metakrilat monomerleri varlığında serbest radikal polimerizasyon yöntemiyle sentezlenmiştir. Poli (metil metakrilat-ko-metakrilik asit) yapısı, GPC, FT-IR ve 1H-NMR metotları analizleri ile karakterize edildi. Mn = 39800 g / mol PDI: 2.04 Radikal polimerizasyon verimi% 42 olarak elde edildi. Poli (metil metakrilat-ko-metakrilik asit) 'in termal bozunma kinetiği ayrıca araştırılmıştır. Poli (MM-ko-MA) 'nın ısıl bozulması iki aşamada gözlenmiştir. Kinetik parametreler Flynn-Wall-Ozawa işlemi ve Kissinger metodu ile hesaplandı. Birinci adım ve ikinci adımın aktivasyon enerjisinin Flynn-Wall-Ozawa metoduna göre 108,34 kJ / mol, 253,41 kJ / mol olduğu belirlenmiştir. Kissinger-Akahira-Sunose metoduna göre, ilk adımın aktivasyon enerjisi 114,40 kJ / mol ve ikinci adımın aktivasyon enerjisi 231,13 kJ / mol bulunmuştur.
Synthesis, Characterization and Thermal Degradation Kinetics of Poly(methylmethacrylate-co-methacrylic acid)
In this study, poly (methyl methacrylate-co-methacrylic acid) (poly(MM-co-MA)) was synthesized at 70 OC in the presence of benzoyl peroxide, methacrylic acid and methyl methacrylate monomers by free radical addition polymerization method. The obtained structure of poly (methyl methacrylate-co-methacrylic acid) was characterized by GPC(Gel permeation chromatography), FT-IR(Fourier transform infrared spectroscopy) and 1H-NMR(Nuclear magnetic resonance) analyses. (Mn=39800 g/mol PDI: 2.04) Radical polymerization yield was obtained at 42%. The thermal decomposition kinetics of poly (methyl methacrylate-co-methacrylic acid) was also investigated by the thermogravimetric process. The thermal degradation of the poly(MM-co-MA) was observed in two steps. Kinetic parameters were computed by the Flynn-Wall-Ozawa process and the Kissinger process. The first step and second step activation energy was determined to be 108,34 kJ / mol, 253,41 kJ / mol according to the Flynn-Wall-Ozawa process. According to the Kissinger-Akahira-Sunose process, the activation energy of the first step was 114,40 kJ/mol and activation energy of the second step was 231,13 kJ/mol.
___
- References[1] Duarte, ARC, Simplício, AL , González, AV, Paternanault, PS, Coimbra, P, Gil, MH, Sousa, HC, Duarte, CMM. 2007. Supercritical fluid impregnation of a biocompatible polymer for ophthalmic drug delivery. J. Supercrit; 42: 373–377.[2] Govender, T, Stolnik, S, Garnett, MC, Illum, L, Davis, SS. 1999. PLGA nanoparticles preparated by nanoprecipitation: drug loading and release studies of a watersoluble drug, J; 57: 171–185.[3] Lee, S, Jin, BS, Lee, JW. 2006. Thermal degradation kinetics of antimicrobial agent, poly(hexamethylene guanidine) phosphate. Macromolecular Research; 14: 491-498.[4] Wang, D, Das, A, Leuteritz, A, Boldt, R, Häußler, L, Wagenknecht, U, Heinrich, G. 2010. Thermal degradation behaviors of a novel nanocomposite based on polypropylene and Co-Al layered double hydroxide. Polymer Degradation and Stability; 96: 285-290. [5] Yuzay, IE, Auras, R, Soto-Valdez, H, Selke, S. 2010. Effect of synthetic and natural zeolites on morphology and thermal degradation of poly(lactic acid) composites. Polymer Degradation and Stability; 95: 1769-1777. [6] Badia, JD, Santonja-Blasco, L, Morina, R, Ribes-Greus, A. 2006. Thermal analysis applied to the characterization of degradation in soil of polylactide: II. On the thermal stability and thermal decomposition kinetics. Polymer Degradation and Stability; 95: 2192-2199. [7] Hamciuc, C, Vlad-Bubulac, T, Petreus, O, Lisa, G. 2007. Kinetic of thermal degradation in non-isothermal conditions of some phosphorus-containing polyesters and polyesterimides. European Polymer Journal; 43: 980-988.[8] Wang, D, Das, A, Leuteritz, A, Boldt, R, Häußler, L, Wagenknecht, U, Heinrich, G. 2010. Thermal degradation behaviors of a novel nanocomposite based on polypropylene and Co-Al layered double hydroxide. Polymer Degradation and Stability; 96: 285-290. [9] Fraga, F, Nũňez, ER. 2001. Activation energies for the epoxy system BADGE n=0/m-XAD obtained using data from thermogravimetric analysis. Journal of applied polymer science; 80: 776-782.[10] Dogan, F, Akat, H, Balcan, M, Kaya, I, Yurekli, M. 2008. Synthesis, characterization, and thermal degradation kinetics of Poly(decamethylene 2-oxoglutarate). Journal of applied polymer science; 108: 2328-2336. [11] Nanaki, SG, Chrissafis, K, Bikiaris, DN. 2011. Effect of molar ratio on thermal mass loss kinetics of poly(ε-caprolactone-b-propylene adipate) copolymers. Thermochimica Acta; 452: 106–115.