Fevzi BEDİR, Erdal AYDEMİR, Gultekin OZDEMİR, Abdullah EROGLU

3837

An EPQ model with imperfect items using interval grey numbers

An EPQ model with imperfect items using interval grey numbers

The classic economic production quantity (EPQ) model has been widely used to determine the optimal production quantity. However, the analysis for finding an EPQ model has many weaknesses which lead many researchers and practitioners to make extensions in several aspects on the original EPQ model. The basic assumption of EPQ model is that 100% of manufactured products are non-defective that is not valid for many production processes generally. The purpose of this paper is to develop an EPQ model with grey demand rate and cost values with maximum backorder level allowed with the good quality items in units under an imperfect production process. The imperfect items are considered to be low quality items which are sold to a particular purchaser at a lower price and, the others are reworked and scrapped. A mathematical model is developed and then an industrial example is presented on the wooden chipboard production process for illustration of the proposed model.
PDF

___

  • [1] Taft, E. W., The most economical production lot. Iron Age, 101, 1410-1412 (1918).
  • [2] Salameh, M. K., Jaber, M. Y., Economic production quantity model for items with imperfect quality. International Journal of Production Economics, 64, 59-64 (2000).
  • [3] Liao, J. J., On an EPQ model for deteriorating items under permissible delay in payments. Applied Mathematical Modelling, 31, 393-403 (2007).
  • [4] Darwish, M., EPQ model with varying setup cost. International Journal of Production Economics, 113, 297-306 (2008).
  • [5] Jaber, M. Y., Goyal, S. K., Imran, M., Economic production quantity model for items with imperfect quality subject to learning effects. International Journal of Production Economics, 115, 143-150 (2008).
  • [6] Pentico, D. W., Matthew, J. D., Toews, C., The deterministic EPQ with partial backordering: a new approach. Omega, 37, 624-636 (2009).
  • [7] Teng, J. T., Chang, C. T., Optimal manufacturer's replenishment policies in the EPQ model under two levels of trade credit policy. European Journal of Operational Research, 195, 358-363 (2009).
  • [8] Mahata, G. C., An EPQ-based inventory model for exponentially deteriorating items under retailer partial trade credit policy in supply chain. Expert Systems with Applications, 39, 3537-3550 (2012).
  • [9] Rosenblatt, M. J., Lee, H. L., Economic production cycles with imperfect production processes. IEE Transactions, 18, 48-55 (1986).
  • [10] Kim, C. H., Hong, Y., An optimal production run length in deteriorating production processes. International Journal of Production Economics, 58, 183-189 (1999).
  • [11] Hayek, P. A., Salameh, M. K., Production lot sizing with the reworking of imperfect quality items produced. Production Planning and Control, 12(6), 584-590 (2001).
  • [12] Chiu, Y. P., Determining the optimal lot size for the finite production model with random defective rate, the rework process, and backlogging. Engineering Optimization, 35(4),
  • [13] Papachristos, S., Konstantaras, I., Economic ordering quantity models for items with imperfect quality. International Journal of Production Economics, 100, 148-154 (2006).
  • [14] Pan, J. C. H., Yang, M. F., Integrated inventory models with fuzzy annual demand and fuzzy production rate in a supply chain. International Journal of Production Research, 46(3), 753-770 (2008).
  • [15] Chiu, S. W., Wang, S. L., Chiu, Y. S. P., Determining the optimal run time for EPQ model with scrap, rework, and stochastic breakdowns. European Journal of Operational Research, 180(2), 664-676 (2007).
  • [16] Lo, S. T., Wee, H. M., Huang, W. C., An integrated production-inventory model with imperfect production processes and Weibull distribution deterioration under inflation. International Journal of Production Economics, 106, 248-260 (2007).
  • [17] Ojha, D., Sarker, B. R., Biswas, P., An optimal batch size for an imperfect production system with quality assurance and rework. International Journal of Production Research, 45:14, 3191-3214 (2007).
  • [18] Wee, H. M., Widyadana, G. A., Economic production quantity models for deteriorating items with rework and stochastic preventive maintenance time. International Journal of Production Research, 50 (11), 2940-2952 (2012).
  • [19] Chung, C. J., Widyadana, G. A., Wee, H. M., Economic production quantity model for deteriorating inventory with random machine unavailability and shortage, International Journal of Production Research, 49(3), 883- 902 (2011).
  • [20] Chen, S. H., Wang, S. T., Chang, S. M., Optimization of fuzzy production inventory model with repairable defective products under crisp or fuzzy production quantity. International Journal of Operations Research, 2 (2), 31-37 (2005).
  • [21] Halim, K. A., Giri, B. C., Chaudhuri, K. S., Fuzzy EPQ models for an imperfect production system. International Journal of Systems Science, 40 (1), 45-52 (2009).
  • [22] Roy, A., Maity, K., Kar, S., Maiti, M., A production-inventory model with remanufacturing for defective and usable items in fuzzy-environment. Computers and Industrial Engineering, 56, 87-96 (2009).
  • [23] Pan, E., Jin, Y., Wang, S., Cang, T., An integrated EPQ model based on a control chart for an imperfect production process. International Journal of Production Research, 50 (23), 6999-7011 (2012).
  • [24] Chang, H. C., An application of fuzzy sets theory to the EOQ model with imperfect quality items. Computers and Operation Research, 31, 2079-2092 (2004).
  • [25] Mula, J., Peidro, D., Poler, R., The effectiveness of a fuzzy mathematical programming approach for supply chain production planning with fuzzy demand. International Journal of Production Economics, 128, 136-143 (2010).
  • [26] Islam, S., Roy, T. K., A fuzzy EPQ model with flexibility and reliability consideration and demand dependent unit production cost under a space constraint: A fuzzy geometric approach. Applied Mathematics and Computation, 176, 531-544 (2006).
  • [27] Kazemi, N., Ehsani, E., Jaber, M. Y., An inventory model with backorders with fuzzy parameters and decision variables. International Journal of Approximate Reasoning, 51, 964-972 (2010).
  • [28] Mondal, S., Maiti, M., Multi-item fuzzy EOQ models using genetic algorithm. Computers and Industrial Engineering, 44 (1), 105-117 (2003).
  • [29] Pasandideh, S. H. R., Niaki, S. T. A., A genetic algorithm approach to optimize a multi-products EPQ model with discrete delivery orders and constrained space. Applied Mathematics and Computation, 195, 506-514 (2008).
  • [30] Pal, S., Maiti, M. K., Maiti, M., An EPQ model with price discounted promotional demand in an imprecise planning horizon via Genetic Algorithm. Computers and Industrial Engineering, 57 (1), 181-187 (2009).
  • [31] Bhunia, A. K., Kundu, S., Sannigrahi, T., Goyal, S. K., An application of tournament genetic algorithm in a marketing oriented economic production lot-size model for deteriorating items. International Journal of Production Economics, 119 (1), 112-121 (2009).
  • [32] Zhang, R. Q., Kaku, I., Xiao, Y. Y., Deterministic EOQ with partial back ordering and correlated demand caused by cross-selling.
  • [33] Zhao, P., Wang, H., Gao, H., Improved particle swarm optimization algorithm for stochastic EOQ models with multi-item and multi-storehouse. Proceedings of the IEEE International Conference on Information Acquisition, August 20-23, Welhal, Shandong, China (2006).
  • [34] Deng, J., Control problems of grey systems. Systems and Control Letters, 1(5), 288-294 (1982).
  • [35] Eroglu, A., Sutcu, A., Sulak, H., An economic production quantity model with random defective rate in imperfect production processes. Journal of Faculty of Engineering and Architecture of Gazi University, 23(4), 923-929 (2008).
  • [36] Zadeh, L. A., Fuzzy Sets. Information Control, 8, 338-353 (1965). [37] Tseng, M. L., A causal and effect decision making model of service quality expectation using grey-fuzzy DEMATEL approach. Expert Systems with Applications, 36, 7738-7748 (2009). [38] Deng, J., Introduction to grey system theory. The Journal of Grey System, 1, 1-24 (1989).
  • [39] Liu, S., Lin, Y., Grey Information: Theory and Practical Applications. Springer, Germany (2006).
  • [40] Yamaguchi, D., Li, G. D., Chen, L. C., Nagai, M., Reviewing Crisp, Fuzzy, Grey and Rough Mathematical Models. Proceedings of 2007 IEEE International Conference on Grey Systems and Intelligent Service, Nov 18-20, Nanjing, China (2007).
  • [41] Liu, S., Lin, Y., Grey Systems: Theory and Applications. Springer, Germany (2010).
An International Journal of Optimization and Control: Theories & Applications (IJOCTA)-Cover
  • ISSN: 2146-0957
  • Yayın Aralığı: 4
  • Yayıncı: Prof. Dr. Ramazan YAMAN
Arşiv
Sayıdaki Diğer Makaleler

On constrained reliability maximization using active redundancy in coherent systems with non-overlapping subsystems

Debasis BHATTACHARYA, Soma ROYCHOWDHURY

An EPQ model with imperfect items using interval grey numbers

Fevzi BEDİR, Erdal AYDEMİR, Gultekin OZDEMİR, Abdullah EROGLU

Solving multi-objective job shop problem using nature-based algorithms: new Pareto approximation features

Dominik ZELAZNY, Jaros law RUDY

On G-invexity-type nonlinear programming problems

Tadeusz ANTCZAK, Manuel Arana JİMENEZ